The 1999 Carver 350 Mariner is a 35-foot flybridge cruiser powered by twin 5.7L EFI MerCruiser engines totaling 500 horsepower, with 1223 hours on the motors. Built on a fiberglass hull with a 12-foot 9-inch beam, the boat delivers substantial interior volume for its size. Twin trim tabs aid handling, and a generator provides onboard power. The flybridge features a spacious layout with comfortable seating and a large Bimini top for sun protection.
The main cabin uses a single-level, open-concept layout with good headroom throughout. Updated upholstery refreshes the salon seating, which is arranged for relaxed cruising. The galley is well-proportioned with ample counter and storage space, an electric cooktop, microwave, full-size sink, and three-quarter-size refrigerator.
Forward is a master stateroom with a privacy door, solid storage, and direct access to the head. The head features a full walk-in shower with vacu-flush toilet. A large cockpit with sliding doors opens to the deck, and bow access is straightforward. Additional equipment includes a Lowrance GPS, windlass, air conditioning, heating, and covers for the cockpit, bimini, and bow seat. The boat cruises at approximately 13 knots and reaches around 17 knots at full throttle.
Length
35.00 FT
Beam
12.75 FT
Weight
18,800 LBS
Material
Fiberglass
Shape
Modified-V
Cabins
1
Heads
1
Engines
2
Engine Make
MerCruiser
Engine Model
5.7L EFI
Power
2 x NaN HP
Hours
1,223 HRS
Fuel
Gasoline
Cruising Speed
13.03 KTS
Max Speed
17.38 KTS
Fuel
240 GAL
Water
75 GAL