This 2006 Pieterse cabin cruiser measures 10.5 metres in length with a 3.5-metre beam and 0.85-metre draft, making it suited for inland and coastal waterways. Built from polyester with a round-bilge hull form, the boat is powered by a Yanner 4JH3 75 horsepower four-cylinder turbodiesel engine with approximately 3,750 operating hours. The engine drives a shaft-driven propeller and is paired with a Victron 70-amp charger and alternator. The yacht features a 12/220-volt electrical system with shore power connection, three 200-amp-hour service batteries, a 2-kilowatt inverter, and a 4-kilowatt generator housed in a sound-dampened enclosure.
The accommodation comprises four berths across multiple cabins. The saloon headroom reaches 1.95 metres, with 1.90-metre clearance in the head and forward cabin. The master bunk measures 1.40 by 2.20 metres, while guest berths are 1.80 by 2.00 metres. Teak flooring with ash trim accents the interior, with blue fabric upholstery noted in good condition. The galley holds a three-burner gas cooker with cover and an Isotherm 65-litre refrigerator with freezer compartment.
Exterior features include teak decking with ash trim in the cockpit, stainless steel railings and fittings, a swim platform with teak, and a swim ladder. Both bow and stern thrusters are Vetus units with wireless remote controls. Equipment includes an electric anchor windlass with remote, a Webasto diesel heating system, a 40-litre water heater, and extensive navigation electronics from Raymarine. Anti-fouling was recently applied. The boat carries CE Category C certification.
Length
34.45 FT
Beam
11.48 FT
Engines
1
Engine Make
Yanmar
Engine Model
4JH3
Hours
3,750 HRS
Fuel
Diesel
Fuel
79.25 GAL
Water
79.25 GAL