The Dehler 30 OD is a 2022 racing-cruiser built around performance and efficiency. Its fiberglass hull is constructed using vacuum infusion with a PVC sandwich core, incorporating a rigid carbon cage for structural strength. The boat features a carbon fiber fin keel with lead bulb and draft of 2.2 meters, paired with a twin-rudder system. At 33.8 feet long with a 10.8-foot beam, it combines modern design with practical seaworthiness.
The interior arranges three cabins across a compact, well-considered layout. Forward is a stowage room; the main saloon features an oak table and bench seating with light plywood construction; aft accommodations include berths with 80mm mattresses and Sunbrella upholstery. A galley block on the starboard side holds a single-flame gas stove, washing basin, and integrated cutting board. A manual head and fresh water system serve the wet space, with approximately 40 liters of fresh water storage and a 35-liter black water tank.
The deck is laid out for active sailing, with a Flexiteek cockpit floor and benches, a tiller steering system with adjustable extension, and manual halyard winches. The rig is carbon with rod rigging, aluminum boom, and two reefs. A Nanni Diesel engine of approximately 10 horsepower provides auxiliary power via a retracting drive operated from the cockpit, with a 25-liter fuel tank. The boat carries a comprehensive suite of Garmin/B&G electronics including a Zeus 7-inch chart plotter, autopilot, VHF radio, and AIS transponder.
A new North 3DI sail plan includes mainsail, genoa, gennaker, and staysail, with backup Insails inventory also on hand. Fresh and salt water systems, electric bilge pump, dual-battery lithium setup, and water ballast capability with electric pump complete the specification. The boat holds CE Category A certification.
Length
33.79 FT
Beam
10.76 FT
Weight
6,172.95 LBS
Material
Fiberglass
Shape
Displacement
Cabins
3
Heads
1
Engines
1
Engine Make
Nanni Diesel
Power
NaN HP
Fuel
Diesel
Fuel
6.6 GAL
Water
10.57 GAL