2024 Jeanneau Leader 7.5 CC Series 3

The 2024 Jeanneau Leader 7.5 CC Series 3 is a 25-foot center console built on a fiberglass hull designed by Michael Peters. Powered by a single Yamaha F300 four-stroke outboard producing 300 horsepower, the boat cruises at 30 mph and reaches speeds above 46 mph, with a range of approximately 200 miles on a full tank. The hull design emphasizes dynamic lines and sporty handling, while a fiberglass T-top with white powder coat provides full sun protection at the helm. Large flush swim platforms on both sides ease boarding.

The layout prioritizes social space and comfort across the cockpit. Aft, a U-shaped bench with a folding center table creates a dining area that can be stowed when not in use. Forward seating converts into a generous lounge, with a hinged bench hatch that opens below for stowage. The optional leaning post version includes an exterior galley with refrigerator, transom shower, and baitwell with saltwater pump and deck washdown. Both forward and aft cockpits can be shaded with optional sunshades.

Below deck, the boat sleeps two with a double berth in the forward cabin and a marine toilet with holding tank. Accommodations are supported by 110-volt shore power, battery charger, and a bow thruster for maneuvering. Electronics include a Garmin GPSMAP 1223 XSV chartplotter with GT15M transducer and Fusion audio system, along with Yamaha pre-rigged electronic outboard controls with drive-by-wire capability and automatic trim.

Standard equipment includes an aluminum and fiberglass T-top, LED cockpit lighting, windlass control at the helm, anchoring kit, ski mast on the arch, automatic ZipWake trim tabs, and multiple backrests and cushions throughout the cockpit.