2000 Jutson 46 LRC

This 46-foot catamaran was designed and built in Australia as a custom commission, incorporating features and systems typically found only on much larger vessels. The fiberglass hull uses a layup of epoxy, Kevlar, and foam, resulting in a strong, quiet structure. Twin Yanmar diesel engines produce 480 horsepower combined and cruise efficiently at 8 knots on 5 gallons per hour, delivering a range of 1,280 nautical miles. The boat reaches 17 knots at wide-open throttle and draws just 3 feet 3 inches of water, with a bridge clearance of 16 feet 5 inches.

The interior features wood appointments throughout and is laid out with a master stateroom in each hull, allowing four adults to have separate sleeping quarters. Two heads serve the accommodations. Climate control comes from 48,000 BTUs of air conditioning split between two units. The pilothouse sits amidships with a full helm station, and additional control stations are located on the flybridge and at the bow, offering flexibility for different operating conditions and preferences.

The boat is equipped with numerous practical details: walk-in engine rooms with access on all sides of the main engines, removable engine hatches, fresh water rinse stations in the engine rooms, an onboard fuel polishing and transfer system, and extensive storage throughout. Safety features include child and pet gates for the swim platforms. High-quality seating consists of a Pompanette Platinum captain's chair and companion seats.

A comprehensive topside and hull paint was completed in 2017. Bottom paint and running gear were serviced in December 2025, which included installation of new turbos and shaft seals on both Yammer engines. The boat retains extensive service records and documentation from its build, including construction drawings, notes, and a photographic record of its creation.